Burying a hot tub: Everything you need to know for a perfect wellness spot in your garden

At Welvaere , we recommend partially buried

At Welvaere , we understand that it's cool to completely dig in your hot tub. Yet more often than not, we recommend partially digging in the hot tub. When you place the hot tub and heater at the same height, with one side against an elevation, you benefit from a sleek look while maintaining the natural circulation of the heater.

If you want to place the hot tub completely in the ground, this brings additional challenges. This is because the natural circulation of the stove no longer works as normal and a circulation pump will be needed. Keep in mind that Welvaere does not supply or install these pumps. Partially buried is not only more practical, but also an excellent way to create a luxurious look without sacrificing convenience.

How is a hot tub partially buried?

Partially burrowing a hot tub requires careful preparation and a smart approach. Here are the steps you can follow:

1. Choose the right location
   Provide a solid, level surface that is easily accessible. Also consider enough space around the hot tub to place the heater and filter, as well as for maintenance or repairs. Choose a spot where one side of the hot tub can stand against an elevation for a stylish look and practical use.
2. Preparing the ground
   A solid foundation, such as a concrete slab or layer of stabilized sand, is essential to prevent subsidence. This is especially important on the side where the hot tub rests completely on the ground.
3. Digging out the ground
   Dig a hole slightly wider than the depth of the desired installation height. This will allow you to work easily and leave room for insulation and cables. Make sure the ground around the hot tub is firm and, if necessary, place a support structure against the wall of the elevation.
4. Installing a drainage system
   A special drainage system helps drain rainwater. This prevents water from accumulating on the buried side of the hot tub.
5. Placing the hot tub
   Carefully lower the hot tub using a crane or other tool. Make sure the hot tub is level, especially since the stove and hot tub must remain at the same height for optimal operation. Carefully fill the space around the buried side and finish the elevation with wood or other materials for a nice look.

By partially burrowing the hot tub, you combine a luxurious look with practical ease of use. Plus, you preserve the natural circulation of the heater without the need for additional modifications.

Burrowing plastic hot tub

Plastic hot tubs are lighter in weight and therefore relatively easy to dig in. Important:

• Provide proper support around the hot tub to prevent distortion.
• Install insulation to minimize heat loss.
  View our plastic hot tubs for more information.

Burrowing wood-fired hot tub

With a wood-fired hot tub, you need to consider the placement of the external stove. If you place the hot tub partially in the ground, make sure that the stove remains easily accessible and the pipes are well insulated. Want to know more? Read all about our wood-fired hot tubs.